Native Instruments TRAKTOR KONTROL Z2 - 2+2 Channel Control Mixer - Manual (Page 46)

4.8.1 Connect the Left CD Player
1. Connect the left and right audio output cables of the left CD player (L) to the LINE A RCA
inputs of the Z2's INPUT section.
2. Make sure the phono/line switch for channel A (on the Z2's top panel) is set to LN for line
level amplification.
Notice that the TRAKTOR button next to the switch is unlit. This means that channel A is
operating in Direct mode and that the channel will bypass the TRAKTOR software for
stand-alone operation. For controlling TRAKTOR with Timecode media, you will need to ac-
tivate TRAKTOR mode later on. You will find further information on the Z2's operation
modes later in this document and in the TRAKTOR KONTROL Z2 Manual.
Setting Up Your TRAKTOR KONTROL Z2 System
Connecting CD Players
TRAKTOR KONTROL Z2 - Setup Guide - 46