Canon PIXMA G620 Printer - Manual (Page 165)

Selects whether WSD is enabled or disabled.
Note
• When this setting is enabled, the printer icon is displayed on the Network Explorer in •
Windows.
◦ Optimize WSD-In ◦
Selecting Enable allows you to receive the WSD printing data faster.
◦ WSD scan from dev. ◦
Selecting Enable allows you to transfer the scanned data to the computer using WSD.
◦ Timeout setting ◦
Specifies the timeout length.
• Bonjour settings •
Setting items when you use Bonjour.
◦ Enab./disab. Bonjour ◦
Selecting Enable allows you to use Bonjour to perform the network settings.
◦ Enter service name ◦
Specifies the Bonjour service name. You can use up to 48 characters for the name.
Note
• You cannot use the same service name as that already used for other LAN connected •
devices.
• LPR setting •
Enables/disables the LPR setting.
• RAW protocol •
Enables/disables RAW printing.
• LLMNR •
Enables/disables LLMNR (Link-Local Multicast Name Resolution). Selecting Enable allows the printer
to detect printer's IP address from the printer name without a DNS server.
• IPP settings •
Selecting Enable allows you to print via the network with the IPP protocol.
• PictBridge commun. •
Setting items for printing from a PictBridge (Wi-Fi) compliant device.
◦ Enable/disable ◦
Selecting Enable allows you to print from a PictBridge (Wi-Fi) compliant device.
◦ Timeout setting ◦
Specifies the timeout length.
165