Canon PIXMA G620 Printer - Manual (Page 33)

Default Network Settings
LAN Connection Defaults
Item Default
Network name (SSID) BJNPSETUP
Wi-Fi security Disable
IP address ( IPv4 ) Auto setup
IP address ( IPv6 ) Auto setup
Set printer name * XXXXXXXXXXXX
Enable/disable IPv6 Enable
Enable/disable WSD Enable
Timeout setting 15 minutes
Enab./disab. Bonjour Enable
Service name Canon G600 series
LPR setting Enable
RAW protocol Enable
LLMNR Enable
PictBridge commun. ( Enable/disable ) Enable
("XX" represents alphanumeric characters.)
* Default value depends on printer. To check value, use operation panel.
LAN settings
Wireless Direct Defaults
Item Default
WL Direct net.(SSID) DIRECT-abXX-G600series *1
Password YYYYYYYYYY *2
Security method WPA2-PSK (AES)
Confirm request Displayed
*1 "ab" is specified at random and "XX" represents last two digits of printer's MAC address. (The value is
specified when the printer is turned on for the first time.)
33