Enterasys Networks XSR-3020 - Manual (Page 44)

Connecting Cables
2-12 Hardware Installation
6. Attach the power supply cord to the connector at the rear of the XSR, as shown in Figure 2-19
and plug in the country-specific power cord connects to a wall socket. The XSR will power up.
Figure 2-19 Connecting Power Supply Cord
You are now ready to configure the software and initialize the XSR. Continue with Chapter 3,
Software Configuration .
LINE 100~125V~1.25A
200~240V~0.65A
50/60Hz