Epson 400 - Manual (Page 24)

Choosing a Place for the Printer
Follow the guidelines listed below when placing your printer.
❑ Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
❑ Place the printer close enough to the computer for the
interface cable to reach it easily.
❑ Leave adequate room for easy operation and maintenance.
❑ Leave enough room on the table at the front of the printer
to lower the output tray.
❑ Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
❑ Avoid places subject to shocks and vibrations.
❑ Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l’imprimante près d’une prise de contacte où la fiche peut être
débranchée facilement.
❑ Avoid electrical outlets controlled by wall switches or
automatic timers. Also, avoid outlets on the same circuit as
large motors or other appliances that can cause fluctuations
in line voltage.
❑ Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
❑ Use a grounded power outlet; do not use an adapter plug.
2
R
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 2
06-02-97 DR, pass 0
Getting Started 2-3