Epson 400 - Manual (Page 72)

Loading Transparencies
When printing on transparencies, please note the following:
❑ Before loading transparencies, remove the paper support
and reinsert it into the slots at the back of the printer as
shown below.
❑ Always put a support sheet or a sheet of plain paper under
the stack of transparencies.
❑ You can load up to 10 transparencies.
❑ Make sure the printable surface of the paper is face up
when loading transparencies into the sheet feeder. See the
illustration on page 4-4.
❑ Select Ink Jet Transparencies as the Media Type setting in
the printer driver. For more details on making printer
driver settings, see online help for Windows, or Chapter 5
for Macintosh.
new-1
4
R
Hawaii2 Ref. Guide
Rev.b
A5 size Chapter 4
05-20-97 DR, pass 0
Printing on Special Paper 4-7