How to install hepa filter, How to remove hepa filter, How to clean or replace motor filter – Eureka 3690 User Manual

Page 9

Advertising
background image

9

How to Install HEPA Filter

(on some models)

Upper Filter Tabs

Check the HEPA filter each time the dust cup is emptied. Replace twice a year or as
needed.

Bottom Clips

Rear Housing Tabs

Bottom Clips

Insert upper filter corner tabs firmly under
rear housing tabs and pivot filter down until
bottom clips on filter click securely into
place on the cleaner.

How to Remove HEPA Filter

Grasp the bottom clips on the filter and
pull out and down to release the upper
filter tabs from the rear housing tabs on
the cleaner.

How to Clean or Replace Motor Filter

Turn off and unplug cleaner.

1

2

3

Open lid by pushing
down hood latch and
lifting up on lid.

Lift dust cup out
of canister by
handle.

Handle

4

Locate motor filter in
bottom of canister
body and lift out.

5

Clean motor filter by rinsing under warm water and let air dry if heavily soiled.

6

Reinstall completely dry motor filter before use.

Advertising