Eureka 2800 Series - Manual (Page 11)

1. Place hose coupling into blower
outlet.
2. Use 1 1/4 inch diameter hose
and wand(s) to direct air into
small areas.
3. Use optional 2 1/2 inch diameter
hose, wand, and blower nozzle
for large areas.
Blower Nozzle (optional)
Carrying Handle
CAUTION: Do Not attempt to carry wet/dry vac by lid or detachable blower handle.
Only use carrying handles molded onto tank.
Automatic Suction Shut-Off
NOTE: The unit must be used in upright position at all times, otherwise the ball
float will automatically shut-off the suction.
The automatic suction shut-off functions when tank is full of liquid. As the tank fills, the
ball float (inside cage) rises until it seats itself against bottom of motor. This shuts off the
suction causing the motor sound to become higher in pitch. When this happens, empty
tank.
The automatic suction shut-off also functions if the cleaner tips over. To continue use,
turn cleaner off and set it upright. Wait a few seconds to allow motor to come to a
complete stop so ball drops; restart the motor.
How To Empty Wet or Dry Contents From Tank
NOTE: Turn off power switch and unplug electrical cord before emptying tank.
1. Raise hose above tank to drain
excess liquid into tank.
(For wet pick-up only.)
2. Remove hose.
3. Remove lid.
4. Empty contents into suitable
drain for liquids or container for
dry contents.
5. Replace lid and hose and
continue cleaning.
Blower
The hose, tank, and accessories must be cleaned before using as a blower.
NOTE: Always wear safety goggles (not provided). If operated for a prolonged
period of time, ear protection is recommended. Never point blower toward
people, animals, or objects that may be injured/damaged by flying debris.
These units must NOT be used to power a paint sprayer or to supply air
to any other sprayer.
Blower
Outlet
Hose Coupling
11