Epson 600 User Manual
Page 46
Advanced Scanning
Page 39
Setting the Densitometer Measuring Point
In addition to having the desitometer display values
based on the mouse position, you can also fix the
measurement point to a specific location on an image.
This is useful when you want to set a value for a
specific area on an image, such as adjusting the
highlights in an image.
To set the densitometer measuring point:
1. Move the mouse pointer to the point on the image
where you want to measure image density.
2. Press the Shift key while clicking the image.
A red cross
appears at the reading point on the
image. This point remains the stable reading point
until you again press the Shift key while clicking the
image.
Note:
Before using the
densitometer, make sure
you are in pixel view.
TWAIN.bk : advanced.fm5 Page 39 Monday, September 8, 1997 2:06 PM