Epson 1240U - Manual (Page 16)

Setting Up Your Scanner
11
If You’re Running Windows Millennium Edition . . .
1. Make sure your scanner is plugged into
a power source and connected to your
computer; then turn on your
computer. The Add New Hardware
Wizard screen appears.
2. Insert the scanner software CD-ROM
in the CD-ROM or DVD drive.
3. Select Specify the location of the
driver , then click Next .
4. Select Search for the best driver for
your device and Specify a location ,
then click Browse .
5. Select the TWAIN 5\WinME folder on
the CD-ROM, then click OK .
basics.book Page 11 Tuesday, October 24, 2000 9:53 AM