ESPRIT ET588 - Manual (Page 22)

ET488/ET588 21
TREADBELT TRACKING ADJUSTMENT:
The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is
normal for some belts to drift near one side while in use, depending on a user s gait and if they
favor one leg. But if during use the belt continues to move toward one side, adjustments are
necessary.
TO SET TREAD-BELT TRACKING:
(A 6 mm Allen wrench is provided for this adjustment).
Make tracking adjustments on the left side bolt.
Set belt speed at 3 mph.
Be aware that a small adjustment can make a
dramatic difference which may not be apparent
right away. If the belt is too close to the left side,
then turn the bolt only a 1/4 turn to the right
(clockwise) and wait a few minutes for the belt to
adjust itself. Continue to make 1/4 turns until the
belt stabilizes in the center of the running deck. If
the belt is too close to the right side, turn the bolt
counter-clockwise. The belt may require periodic
tracking adjustment depending on use and
walking/running characteristics. Some users may
affect tracking differently. Expect to make
adjustments as required to center the tread-belt.
Adjustments will become less of a maintenance
concern as the belt is used. Proper belt tracking is
an owner responsibility common with all treadmills.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING /
TENSION ADJUSTMENTS IS NOT COVERED UNDER THE SPIRIT WARRANTY.