Logitech Zone 950 Wireless On-Ear Headset (Graphite) - Manual (Page 10)

USB-C USB-C
LOGI TUNE
Logi Tune helps boost your headset
performance with periodic software and
firmware updates Learn more and download
Logi Tune at logitech com/tune, the Apple App
Store or Google Play store.
ON-HEAD DETECTION
Sensors on the headset can detect if the headset
is worn or not and control the status It can be
disabled or enabled on Logi Tune app
Auto pause/resume
During media streaming, when the headset is taken
off, the media will pause When the headset is put
on, the media will resume
Answer incoming call
When there is an incoming call, put on the
headset to answer the call To use this feature,
enable it on Logi Tune app
Mic mute/unmute
During an ongoing call, when the headset
is taken off, the mic will be muted When the
headset is put on, the mic will be unmuted
To use this feature, enable it on Logi Tune app
Note: Functionality depends on the type of application
Note: Headset would be charged during this mode
Button controls may not be available in this mode
AUDIO OVER USB (DENSITY-FRIENDLY)
If your audio is unstable during a call because there
are too many wireless devices nearby (high density),
the headset can be used as a corded headset
1 Turn off the headset
2 Connect the headset to the USB cable provided
And plug the other side of the USB-C cable into
the USB-C port on your computer
3. Make sure "Zone 950" is selected on the audio
device setting.
Logi Tune
logitech.com/tune
10 English