Logitech Zone 950 Wireless On-Ear Headset (Graphite) User Manual
Page 12
UPDATE YOUR HEADSET
It is recommended to update both your headset and receiver
To do so, download Logi Tune from
Note:
Turn off and on the headset after the update is completed to make
sure it is successfully done
RECONNECT YOUR HEADSET
In case the headset is disconnected to the receiver, you can
reconnect your headset via Logi Tune
1 Plug USB-C receiver or USB-A adapter with the USB-C receiver
into the computer USB port
2 Power on the headset by sliding the power switch to the center
3 Open Logi Tune Desktop on your computer
4 Select "Zone Receiver" from the dashboard
5 Wait while it is looking for the previously connected headset
6 If no headset is shown as connected to the receiver,
click “Pair headset”
7 Enter pairing mode on the headset by sliding the power switch
to the Bluetooth icon and holding it for 2 seconds Light
indicator will flash blue rapidly
8 Once successfully paired, the light indicator on the receiver
and on the headset will turn solid white
RESET YOUR HEADSET
To reset your headset back to its original state, power headset on,
hold the power button to the pairing mode and long press the
ANC button for 5 seconds The headset is successfully reset when
the headset light indicator blinks fast in red and white 3 times and
turns off
12 English