Continuous shooting using the self-timer, Continuous shooting, Using the self-timer – Canon PowerShot SX70 HS Digital Camera User Manual
Page 247
Changing the Flash Timing
z
[1st curtain] is used whenever the shutter speed is 1/100 or faster, even
if you select [2nd curtain].
Configuring Safety FE
z
Shots may be captured using settings different from the values
displayed when you press the shutter button halfway.
z
Continuous Shooting
z
During continuous shooting in
mode, focus is locked at the
position determined when you pressed the shutter button halfway.
z
Shooting may stop momentarily or continuous shooting may slow down
depending on shooting conditions and camera settings.
z
As more shots are taken, shooting may slow down.
z
There may be a delay before you can shoot again, depending on
shooting conditions, the type of memory card, and how many shots you
took continuously.
z
Shooting may slow down if the flash fires.
z
Screen display in continuous shooting differs from the images actually
captured and may look out of focus.
z
Fewer continuous shots may be available under some shooting
conditions or camera settings.
z
Using the Self-Timer
z
Even when set, the self-timer has no effect if you press the movie
recording button to start recording.
z
More time is required between shots when the flash fires or when you
have specified to take many shots. Shooting will stop automatically
when the memory card becomes full.
247