Envision Peripherals EN9110 - Manual (Page 12)

EN9110
11
OPERATING INSTRUCTIONS
Press the power button to turn the monitor on or off. The other control buttons
are located on the side of the monitor (See Figure 4). By changing these
settings, the picture can be adjusted to your personal preferences.
•
The power cord should be connected.
•
Connect the video cable from the monitor to the video card.
•
Press the power button to turn on the monitor. The power indicator will
light up.
Figure 4 External Control Button
EXTERNAL CONTROLS
1. Auto Config / Exit
5. Power Indicator
2. / Brightness 6. Power Button
3.
/ Contrast
4. MENU / ENTER
GENERAL INSTRUCTIONS