Envision Peripherals EN9110 - Manual (Page 21)

EN9110
20
FOR FIRST TIME INSTALL :
This is a Plug & Play LCD monitor. Turn off the PC then connect the
cables. Power on the PC and it will automatically detect your new monitor.
The Windows Operating system will automatically install a plug & play
driver for it. If you would still like to install the driver included in the
diskette that came with the monitor, log-on to our website at
www.envisionmonitor.com/support/faq.asp. Then look for “Installing the
Driver” section.
HOW TO INSTALL THE DRIVER-DISK (INF & ICM FILE)