LD Systems ICOA 15 A BT Two-Way 15" Coaxial 1200W Powered Portable PA Speaker with Bluetooth - Manual (Page 11)

11
DEUTSCH
ENGLISH
FRANCAIS
ESPAÑOL
POLSKI
ITALIANO
简体中文
繁體中文
OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
Article number: LDICOA12A LDICOA12ABT LDICOA15A LDICOA15ABT
Product type: Coaxial PA speaker
Type: Powered
Bluetooth audio receiver: - Bluetooth 4.0 - Bluetooth 4.0
Large woofer: 12" 15”
Large woofer: 304.8 mm 381 mm
Woofer magnet: Ferrite
Woofer brand: Custom-made
Tweeter: BEM-optimized CD horn
Large HF driver: 1”
Large HF driver: 25.4 mm
HF driver magnet: Ferrite
HF driver brand: Custom-made
HF driver voice coil: 1”
HF driver voice coil: 25.4 mm
Amplifier: Class D
Dispersion (H x V): 90° x 50°
Power (RMS): 300 W
Power (Peak): 1200 W
Frequency response: 50 Hz–20 kHz 48 Hz–20 kHz
Crossover frequency: 2 kHz
Max. SPL (Peak): 126 dB 128 dB
Take care when opening the device and rotating the high-frequency horn, in order to avoid damage to the speaker and injury to persons. Follow
each step of the instructions exactly. The manufacturer shall not be liable for any damage to devices or injury to persons resulting from improper
handling.
1. Fully disconnect the speaker from the mains (pull out the mains plug) and wait for approx. 3 minutes before starting work!
2. Disconnect all cables from the speaker.
3. Place the speaker in its slanted monitoring position, remove the front grille from the housing (5 x 2.5-mm internal hex screws on left and right of
the housing).
4. Loosen the 4 screws that secure the high-frequency horn (see figure A).
5. Carefully lift the horn and rotate it through 90°, taking care not to damage the tweeter driver cable.
6. Feed the tweeter driver cable into the retainer nut next to the securing lug and replace the horn in the retainers. Ensure that the cable is not
pinched.
7. Carefully secure the horn with the screws and re-install the front grille on the housing.
LDICOA12UB - Universal bracket for ICOA® 12
LDICOA15UB - Universal bracket for ICOA® 15
LDICOA12PC - Padded protective cover for ICOA® 12
LDICOA15PC - Padded protective cover for ICOA® 15
LDICOA12PC2 - Protective cover for ICOA® 12
LDICOA15PC2 - Protective cover for ICOA® 15