Connections, control, and display elements – LD Systems ICOA 15 A BT Two-Way 15" Coaxial 1200W Powered Portable PA Speaker with Bluetooth User Manual

Page 5

Advertising
background image

5

DEUTSCH

ENGLISH

FRANCAIS

ESPAÑOL

POLSKI

ITALIANO

简体中文

繁體中文

LDICOA15A(BT)

• Genuine all-rounder for full-range, satellite, and monitor applications
• Two-way speaker with 15" woofer
• BT model equipped with Bluetooth® audio streaming
• 128 dB max. SPL and 300 W RMS power handling
• Coaxial design with rotatable, BEM-optimized CD horn for vertical and horizontal use
• Horn-loaded woofer
• DynX DSP with four presets featuring three band equalizer and delay function

• Two line/mic input channels with individual gain controllers, 3.5 mm jack input plus mono mix output

• 36 mm dual-tilt stand connection with a tilt angle of 0° and 5°, 55° monitor angle with sturdy stand
• Shockproof front grille for the best speaker protection
• Four aluminium handles with ergonomic, rubberized surface
• Comprehensive range of optionally available accessories for installation and transport

1

2

3

6

7

5

8

4

CONNECTIONS, CONTROL, AND DISPLAY ELEMENTS

1

POWER

On/off switch. The speaker should always be the last device to be switched on in the signal chain, and the first to be switched off.

2

POWER SOCKET AND FUSE HOLDER

IEC power socket with integrated fuse holder. A suitable power cable is included in delivery.
IMPORTANT NOTE: Only replace the fuse with a fuse of the same type and values. Please note
the inscription on the housing. If a fuse trips repeatedly, please contact an authorized service center.

3

LC DISPLAY

Multifunctional graphic LC display for displaying the master volume, the DSP preset and the input level for channels 1 and 2 in the main menu. The

menu items, submenu items, and corresponding editing options are displayed in the Editing menu.

4

VOLUME / PUSH FOR MENU

From the main menu, the master volume can be adjusted by turning the rotary-push encoder. Press the rotary-push encoder to access the Editing

menu. Use the rotary-push encoder to navigate the Editing menu, adjust system settings, and change values in the respective menu items.

Advertising