Attaching the wall plate cover, 20 13. attaching the wall plate cover – Epson ELPMB27 User Manual
Page 20
20
13. Attaching the wall plate cover
Secure the wall plate cover with a hexagonal wrench (M4) and three M4 x 12 mm hexagon socket head cap bolts.
Installation, removal, and servicing of the projector should only be performed by a qualified technician. See the User’s
Guide included with your projector for information about maintenance and repairs.
Wall plate cover
Wall plate cover
M4 x 12 mm
hexagon socket
head cap bolts (x3)
❏ Never loosen the bolts and nuts after installation. Confirm on a regular basis that the screws have not
become loose. If you find any loose screws, tighten them firmly. Otherwise, the projector or wall mount may
fall and cause personal injury or property damage.
❏ Do not hang on the mount or hang heavy objects on it. If the mount or the projector falls, it could cause
personal injury or property damage.
Warning
Copyright © Seiko Epson Corporation 2011. All rights reserved.
Printed in China.