Epson ELPMB27 - Manual (Page 4)

4
Before Use
This product is used for mounting the following short throw projectors to a wall: EB-435W/EB-430/EB-425W/EB-420/
PowerLite 435W/PowerLite 430/PowerLite 425W/PowerLite 420.
Choosing a Location
Determine where you will install the wall mount and prepare the location in advance. Also, make sure there is a gap of 410
to 660 mm (16 to 26 inches) from the top of the image projected onto the white board to the ceiling. See "Screen Size and
Projection Distance" on page 7 for more details.
Do not install the product in a location where it might be exposed to vibration or shock, which could cause damage to the
projector or mounting surface. It could also cause the product to fall, resulting in serious injury or death.
Install the product in a location away from direct sunlight and other electric devices such as fluorescent lights or air
conditioning. Direct sunlight and some kinds of fluorescent lights could interfere with the remote control of the projector.
Epson recommends that the length of the connection cord be less than 20 meters (65.61 ft.) in order to reduce external
noise.