Polk Audio MagniFi Mini AX 2.1-Channel Dolby Atmos Soundbar System User Manual
Page 21
19
Engl
ish
3� Select a button on your TV remote�
Press and release the button on your TV remote that you want to control the sound
bar function you selected in step 2 (for example,
Volume Up
).
If the message “TRY AGAIN” appears on the display, repeat steps 2 and 3.
The message “SUCCESS” appears on the display when the command is successfully
programmed.
4� Repeat steps 2 and 3 to program other buttons�
5� Exit Remote Control Learning mode�
Press and hold the
Source
button (
) until “EXIT” appears on the display.
Clear learned TV remote control codes
Press and hold the
Source
button (
)
on the sound bar for about 10 seconds. You will
hear a two-note tone. Continue holding the button and release the button after you
hear a three-note tone. The message “IR CLEARED” appears on the sound bar.