Epson stylus photo 875dc – Epson STYLUS PHOTO 875DC User Manual

Page 9

Advertising
background image

EPSON Stylus Photo 875DC

4/00

EPSON Stylus Photo 875DC

- 10

Follow these steps to replace ink cartridges:

1. Make sure the printer is turned on and not printing (the

Ppower light should be on, but not flashing).

2. Check the

B black and

A color ink out lights to see which

ink cartridge you need to replace.

3. Open the printer cover and press the orange ink cartridge

replacement button. The print head moves left and the

Ppower light begins flashing.

To avoid damaging the printer, never move the print head
by hand.

4. The color cartridge is on the right and the black cartridge is

on the left. Pull up the ink cartridge clamp all the way. The
cartridge rises up from its holder.

5. Lift the cartridge out of the printer and dispose of it

carefully.

Keep ink cartridges out of the reach of children and
do not drink the ink.

If ink gets on your skin, wash the area thoroughly with
soap and water. If ink gets in your eyes, flush them
immediately with water.

6. Unwrap the ink cartridges, then remove only the yellow

part of the tape seal on top. Don’t pull off the blue part.

You must remove the yellow tape from the top of the
cartridge or you will permanently damage it. Don’t pull off
the blue portion or try to remove the clear seal
underneath the cartridge.

Don’t touch the green circuit board on the back of the
cartridge; you may inhibit normal operation and printing.

7. Tilt the ink cartridge forward slightly as you lower it into its

holder.

Hang the tabs at the back of the cartridge on the hooks on
the holder clamps.

orange ink
cartridge
replacement
button

Black ink
cartridge

Color ink
cartridge

Don’t touch the
green chips

tabs

hooks

Advertising