Epson ActionScanner II - Manual (Page 5)

System and Memory Requirements
For the scanner and your software to work properly, your
system must include the following minimum configuration:
Apple® Macintosh or Power Macintosh™ computer with a
68030 or 68040 processor
Apple system software 7.0 or higher
8MB of system RAM; 4MB of application RAM
Note:
8MB is the minimum amount of RAM; graphics applications run
faster
and more efficiently with at least 12MB of RAM.
At least 100MB of free hard disk space for scanner
applications and images, depending on the size of the
images
A color monitor (one with a 24-bit video card is
recommended)
For PhotoDeluxe, a double-speed or faster CD-ROM drive.
Setting Up the Scanner
Follow these steps to set up the scanner:
1. Take the scanner out of its box and place it on a flat, stable
surface with the rear panel facing you.
2. Remove the tape securing the scanner cover and pull out
the paper underneath the cover.
2