Operation and service information, Controls and indicators – E-Z-GO ST 480 User Manual

Page 16

Advertising
background image

OPERATION AND SERVICE INFORMATION

3-8

Read all of manual to become thoroughly familiar with this vehicle. Pay particular attention to all Notes, Cautions and Warnings

all wheels.
Never use the winch to lift people or other overhead loads.
Do not use the winch to secure loads. Use a tie down
designed for the job.
Do not apply shock loads to the winch.
Do not attempt to modify or weld the winch.

CONTROLS AND INDICATORS

Vehicle controls and indicators consist of:

• key/light switch

• direction selector

• choke

• fuel gauge

• low oil pressure light

• accelerator pedal

• brake pedal

• park brake

• horn

• differential lock

KEY/LIGHT SWITCH

Located on the dash panel, this switch enables the basic electrical sys-
tem of the vehicle to be turned on and off by turning the key. To prevent
inadvertent operation of the vehicle when left unattended, the key
should be turned to the ‘OFF’ position and removed (Ref Fig. 9 on page
3-9).

If the vehicle is equipped with lights, the key switch has a position to
operate them, indicated by the light icon.

If the vehicle is equipped with factory installed cus-
tom accessories, some accessories remain opera-

tional with the key switch in the ‘OFF’ position.

DIRECTION SELECTOR

T o r e d u c e t h e p o s s i b i l i t y o f

Fig. 8 Do Not Pull at Angle

Correct

Incorrect

Ref Wps 2

Advertising