User controls – Elo TouchSystems ADVAN AMM18TK2 User Manual
Page 19
AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2(HB) 19
USER CONTROLS
Front Panel Controls
1. Power LED:
Lights up to indicate the power is turned ON.
2. Power Switch:
To turn ON or OFF the power.
3 . Up:
To enter OSD menu then can use as moving forward in the OSD menu.
4 . Down:
To move backward in the OSD menu.
5 . Select:
Switch PC display to Video display and vice versa by one touch when OSD menu is not
activated.
Enter a sub menu or select a menu item.
6 . Left:
To increase the value of the parameter in the OSD you have selected for adjustment.
To increase the brightness directly when OSD menu is not activated.
7 . Right:
To decrease the value of the parameter in the OSD you have selected for adjustment.
To increase the brightness directly when OSD menu is not activated.
8. Auto Button:
One touch Auto adjust (Hold 1 Sec.) or Exit OSD menu.
Standard OSD Operation
1. Press Up button to activate the OSD.
2. Use Select Up or Down keys to move up or down through the menu. The parameter will be highlighted
wehn selected.
3. Then use + or - to increase or decrease the value of the parameter, or make selection between different
options.
4. To quit the OSD screen at any time during the operation, press Auto button. If no keys are pressed for a
time period, the OSD automatically disappears.