Elo TouchSystems ADVAN AMM18TK2 - Manual (Page 43)

AMM170TK2/AMM17TK2/AMM18TK2/AMM19TK2/AMM19TK2(HB) 43
Tounchscreen User's Manual (AMM170TK2-TE/AMM17TK2-TE/
AMM18TK2-TE/AMM19TK2-TE/AMM19TK2(HB)-TE or
AMM170TK2-TEW/AMM17TK2-TEW/AMM18TK-TEW/AMM19TK2-
TEW/AMM19TK2(HB)-TEW)
Quick Start
1.Connect Power Code and VGA Cable of LCD Monitor.
2.Connect Touchscreen DB9 male RS-232 cable.
3.Turn the LCD display Power ON.
4.Adjust the tilt of LCD Monitor.
5.Adjust the Picture of LCD Monitor.
6.Install driver software of Touchscreen (See "Driver software" for details).
7.Adjust the calibration of Touchscreen (See "Driver software" for details).
Introduction
The ELO IntelliTouch Touchscreen system consists of a touchscreen and an
electronic touchscreen controller. The touchscreen may be a flat, spherical, or
cylindrical and is installed over the face of the LCD. The touchscreen controller
installed inside of theLCD.
The IntelliTouch Touchscreen
The IntelliTouch surface wave touchscreen consists of a glass panel molded to the
precise shape of a display's face. A scratch-resistant, hard-coated plastic cover
sheet may be clear for best image clarity or have an antiglare finish.
The IntelliTouch Controller
The IntelliTouch controllers provide the drive signal for touchscreen, convert the
received analogue signals into digital touch coordinates, and send these
coordinates to the computer.