Epson 1710c User Manual
Page 52
52
Fine-Tuning the Projector
The countdown for the elapsed time begins as soon as you close
the Password Protect menu. (You can check the elapsed time in
this menu next to
Time elapsed
.)
10. To enable your screen logo, select
User’s Logo Protect
and press
Enter
. Select
On
and press
Enter
.
When this feature is on, the logo appears whenever you turn on
the projector (if the
Startup Screen
is enabled in the Extended
menu; see page 53). It also appears when you press the A/V Mute
button (if you selected the
Logo
for the A/V Mute setting under
Display in the Extended menu). None of the User’s Logo features
in the Extended menu can be changed when the User’s Logo
Protect function is enabled.
Starting the Projector with a Password
When the password function is enabled, you see this screen when you
plug in and turn on the projector:
Hold down the
Num
button on the remote control and use the
numeric keypad to enter the four digit password.
The password screen closes, the numeric keypad is automatically
deactivated, and projection begins.