Resetting the lamp timer – Epson 1710c User Manual
Page 63
Advertising
![background image](/manuals/86854/63/background.png)
Maintaining the Projector
63
Resetting the Lamp Timer
After you replace the lamp, you need to reset the lamp timer using the
projector’s menus.
1. Press the
Menu
button on the remote control or on the
projector’s control panel. You see the main menu.
2. Use the
pointer button on the remote control (or the arrow
buttons on the projector) to highlight
Reset
, then press
Enter
.
You see this screen:
3. Select
Reset Lamp Hours
and press
Enter
.
4. When you see the prompt, select
Yes and
press
Enter
.
5. When you’re finished, press
Esc
or
Menu
to exit the Menu
system.
Advertising
This manual is related to the following products: