Eaton Electrical CA04801001E - Manual (Page 4)

March 2008
4
For more information visit: www.eaton.com CA04801001E
Operator Interface Products
ELC Graphics Panels
Software and Accessories
ELCSoftGP Programming
Software
ELCSoftGP Programming Software
configures all ELC graphic panels. With
ELCSoftGP, applications can be created,
edited, downloaded, uploaded, etc.
Move programs from one controller to
a different one with ease.
Requirements:
■ Operating Systems – Windows 98,
Windows ME, Windows 2000,
Windows XP
■ Hard Drive – At least 100M bytes
■ RAM – At least 256M bytes
ELCSoftGP Editing Environment
Accessories
ELC-GPXFERMOD Program
Transfer Module
The ELC-GPXFERMOD is a multifunc-
tion device that provides the ability to
back up an application already loaded
onto one of the ELC-GPxx units. It will
store all system settings like baud, ID,
etc., as well as passwords and the
application itself. Once stored in the
module, the application and settings
can be transferred to another ELC-
GPxx unit of the same model number.
Figure 1. ELC-GPXFERMOD