Epson S1C62 Family - Manual (Page 81)

FUNCTION OPTION GENERATOR FOG62XX
S1C62 FAMILY EPSON V-7
DEVELOPMENT TOOL REFERENCE MANUAL
4.5 HEX File Generation and EPROM Selection
When setting function options setting is completed, the following message is output to ask the operator
whether to generate the HEX file.
END OF OPTION SETTING.
DO YOU MAKE HEX FILE (Y/N) ? Y
. . (1)
*** OPTION EPROM SELECT MENU ***
1. 27C64
2. 27C128
3. 27C256
4. 27C512
PLEASE SELECT NO.? 2 . . (2)
2. 27C128 SELECTED
When debugging the program with evaluation
board, HEX file C2XXYYYF.HEX is needed.
Note The EPROM to be mounted on the
evaluation board must satisfy the following
conditions:
EPROM for setting function options:
Tacc
≤
250 ns
(Tacc: Access time)
(1) DO YOU MAKE HEX FILE (Y/N)?
When debugging the program with evaluation board, HEX file C2XXYYYF.HEX is needed, so enter "Y".
If "N" is entered, no HEX files are generated and only document files C2XXYYYF.DOC is generated.
(2) PLEASE SELECT NO.?
For the option ROM selection menu displayed when "Y" is entered in Step (1), select the EPROM to be
used for setting evaluation board options. This menu is not displayed when "N" is entered in Step (1).
One EPROM is required for setting function options (27C128 is selected in the above example).
When the above operation is completed,
FOG62XX generates files. If no error is committed
while setting segment options, the following
message is output and the sequence returns to the
operation selection menu.
MAKING FILE(S) IS COMPLETED.
4.6 End Procedure
This section explains how to end FOG62XX execution.
*** OPERATION SELECT MENU ***
1. INPUT NEW FILE
2. EDIT FILE
3. RETURN TO DOS
PLEASE SELECT NO.? 3
A>
FOG62XX can be forcibly terminated by pressing the "CTRL" and "C" keys together during program
execution. (It is possible by pressing "STOP" key depending on the PC used.)
When a series of operations are complete, the
sequence returns to the operation selection menu.
Execution of FOG62XX can be ended by selecting
"3. RETURN TO DOS" on this menu. If "1. INPUT
NEW FILE" or
"2. EDIT FILE" is selected, setting function options
can be performed again.