Camera settings, Settings and icons, Taking photos with fun frames – Epson PhotoPC L-410 User Manual

Page 4: Epson photopc l-410

Advertising
background image

Epson PhotoPC L-410

8/04

Epson PhotoPC L-410

-

4

3. Make sure you are at least 20 inches (50 cm) away from

your subject.

❏ To zoom in on your subject, press the T (telephoto)

button.

❏ To zoom out, press the W (wide-angle) button.

4. Center your subject in the middle of the square focus frame

on the screen.

The default flash setting is automatic, indicated by the

icon on the

LCD screen. The flash will go off

automatically whenever necessary.

If you want to change the flash setting, press the

r

button.

See the list of flash settings in the next column.

5. Press and hold the shutter button halfway. The focus frame

turns green and the focus is set. If you want to reframe your
picture, move the camera until the photo you want appears
on the screen.

6. Press the shutter button all the way down. The camera

beeps as it captures the image.

Note: The LCD screen may turn off to save battery power after you
take a picture. Press any button or turn the Mode dial to turn the
screen back on.

Camera Settings

Camera settings are displayed on the LCD screen. Press the
DISP button to turn the display on or off.

Settings and Icons

Taking Photos With Fun Frames

You can use P.I.F. (PRINT Image Framer

®

) to take pictures

with a variety of frames for holidays and special occasions.

Frames are already stored in your camera, and additional
frames are copied to your computer when you install the
camera software. You can use the PRINT Image Framer Tool
to copy the frames from your computer to the camera.

You can also modify the frames or create original frames using
PIF Designer. See the Camera Basics manual for instructions
on installing the software.

Self-timer

(2 seconds),

(10 seconds)

Focus frame

Place your subject within the focus frame. When
you press the shutter button halfway, the focus
frame turns green.

Battery life

Displays for a few seconds to indicate battery

is full, half-full, or empty

Zoom bar

The digital zoom indicator appears when

W or

T is pressed.

Scene mode

Landscape mode,

Portrait mode

Exposure
compensation

(+2.0 to -2.0)

Sensitivity

(Auto, 100, 200, 400)

White balance

(Auto, Daylight, Cloudy, Incandescent,

Fluorescent, Mercury)

Quality

F2304, F1600,

F640, N2304,

N1600, N640

Macro mode

Macro

Flash

Auto-flash,

Flash off,

Auto red-eye

reduction, Fill-in flash,

Slow synchro

Shooting
mode

Continuous shooting mode,

Video mode

Photos left

125 (for example)

Warning

Camera shake

Advertising