Eureka 4230 Series - Manual (Page 4)

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com
How to Identify Parts of Vacuum Cleaner
EXT-U Belt
HEPA Filter
HF11
Screen
Filter
DCF21
Brush Roll
Telescoping Handle
Hose
Power Paw ®
Filter and Screen
(located inside dust cup)
Dust Cup
HEPA Filter Compartment
Height Adjustment Knob
Brush Roll Cover
Headlight
Cord Retainer
Maintenance Schedule
Maintenance Schedule is also located on back side of dust cup.
! READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using.
Plug Storage
Power Switch
ON (I) / OFF (O)
Crevice Tool
Hose Hook
Dusting Brush
Cord Reel
Carrying Handle
Hose Retainer
Handle Release
Cord Rewind Button
Telescoping Wand
Wand Retainer
Hose Connector
DUST CUP – Empty after each use
FILTER DCF21 – Check regularly, clean as needed
BRUSH ROLL – Clean monthly
EXT-U BELT – Replace worn, cut or out of shape belt
Push button to release bottom lid.
Debris will empty.
Close bottom lid
until it clicks.
Pull out filter. Empty dust cup. Pull
back latch to lift off lid.
Shake dust from filter.
Rinse filter and screen;
dry thoroughly.
Reinstall filter and
screen inside dust cup.
Align lid at front; press down
until lid snaps into place.
HEPA FILTER HF11 – Replace within 6 months
Remove dust cup. Lift up tab on filter cover
and pull off.
Lift out filter
and replace.