Epson V4.21 - Manual (Page 25)

24 Monitoring window layout
*You can display the "Replace Lamp" warning at any time preset in
"Environment setup" in the "Tool" menu.
Checking properties in detail
You can check the properties of groups and projectors in detail.
f Displaying group properties
You can use either of the following methods to display the properties.
• Displaying the properties for all groups in "Grouping view"
Right-click in "Grouping view" and then select "Property".
• Displaying properties for specified groups
Right-click an icon in "Grouping view" and then select "Property".
Error information: Shows the warning or problem status using the
following icons.
Replace Lamp* Lamp Cover Open
High-temperature
warning
Lamp Error
Replace Air Filter
Lamp failure at
power on
No Air Filter
High internal
temperature error
Low Air Flow Internal Error
Air Flow Sensor Err. Fan error
Low air flow error Sensor error
Air filter air flow
sensor error
Other error
If you double-click
in a line, the
properties for that
group or projector
will be displayed.