Oven door and glass panels – Electrolux E33542-6 User Manual

Page 22

Advertising
background image

Before you change the oven lamp:

• Switch off the oven.

• Remove the fuses in the fuse box or switch off the circuit breaker.
Put a cloth on the bottom of the oven for protection of the oven light and glass cover.

Replacing the oven light bulb/cleaning the glass cover

1. Turn the glass cover anti-clockwise to remove it.

2. Clean the glass cover.

3. Replace the oven light bulb with applicable 300°C heat-resistant oven light bulb.

4. Install the glass cover.

Oven door and glass panels

To clean the oven door remove it.
CAUTION!

Be careful when you remove the door from the appliance. The door is heavy!

Removing the oven door

1. Open the oven door as far as it goes.

2. Lift up clamping levers (A) on the two door

hinges fully.

3. Close the oven door until the first position

(angle approximately 45°).

4. Hold of the oven door with one hand on

each side and pull it away from the oven

at an upwards angle.

5. Now you can remove the inner glass pan-

els and clean them.
To install the door follow the procedure in

reverse.

CAUTION!

Be careful with the glass, it can break.

The oven door has 2, 3 or 4 panels of glass (depends on the model)

Put the oven door with the outer side down on a soft and level surface to prevent scratches

A

A

45°

22

Care and cleaning

Advertising