Epson ELPMB24 - Manual (Page 11)

11
English
8. Attaching the protective covers
Attach the wall plate cover, cable cover, and arm cover using the hexagon wrench (M4) and six M4
×
12 mm bolts.
Only a specialist should remove or install the projector, including for maintenance and repairs. See User's Guide of your
projector for instructions on maintenance and repairs.
Wall plate cover
Arm cover
Cable cover
Wall plate cover
❏ Never loosen the bolts and nuts after installation. Confirm that the screws have not become loosened on a
regular basis. If you find any loose, tighten the screws firmly. If the screws are not tightened firmly, it could
cause the projector to fall and cause personal injury or property damage.
❏ Do not hang onto the mount. Or do not hang a heavy object on the mount. It is dangerous if the mount falls
down. If the projector or the arm unit falls down, it could cause personal injury or property damage.
Warning