Epson ELPMB24 - Manual (Page 9)

9
English
4. Installing the projector on the wall mount
1) Slide the projector plate onto the adjustment unit as shown below.
2) Secure the projector temporarily using two M4
×
12 mm bolts as shown below.
5. Adjusting the length of the arm
1) Loosen the screw on the arm. ( )
2) Adjust the length of the arm using the measure on the bottom to match the projection distance recommended in "Screen
Size and Projection Distance" on page 6. (
)
3) Secure the arm position temporarily using the screw on top. ( )
6. Connecting the power cable and other cables to the projector
M4 × 12 mm hexagon socket
head cap bolt (2 pcs)
washer (2 pcs.)
Adjustment unit
Projector plate
Mark