Eclipse - Fujitsu Ten CD2000 User Manual
Page 6
- 6 -
Wire colors and connection points for connection wires
2
Never connect the power supply to the speaker wires (No.7 and No.8),
otherwise it will cause damage to the main unit.
Caution
ACC (Red)
Connect where the power comes on when the ignition is in the ACC position.
B+ (Yellow)
Connect where power is constantly available, regardless of the ignition key's position.
Ground (Black)
Connect where good body grounding is available.
Antenna power supply (Blue)
Connect to the automatic-antenna control terminal of the vehicle.
Illumination power supply (Orange/White)
Connect to where power comes on when the vehicle light switch is turned on.
Control power supply (Blue/White)
Connect the control terminal for the external amplifier, etc.
Front speaker output wires
Connect to the front speakers.
White:
Left +
White/black:
Left -
Gray:
Right +
Gray/Black:
Right -
Rear speaker output wires
Connect to the rear speakers.
Green:
Left +
Green/black:
Left -
Purple: Right +
Purple/Black:
Right -
8
7
6
5
4
3
2
1
English
E
spañol
Français
Italiano
Nederlands
Svenska
English