Electrolux PE 8036-M - Manual (Page 15)

15
PES 8036-m. The drawer has a
lot of useful compartments:
- One large compartment for cups
and saucers
- A basin for coffee-grounds
- A compartment for all accessories
(filters, measure).
- A tray
7. COFFEE
USE OF COFFEE
· Set the coffee knob (B-19) to the
required coffee measure.
· Insert the filter-holder (A-11)
under the Coffee measuring
device (A-5). By pressing the
relative button (A-4), the
previously programmed coffee
measure for one or two cups will
automatically come out. Once the
required measure has been
dispensed, press the ground
coffee with the pressing tool (A-
3).
· Insert the filter-holder (A-11)
correctly into the ring nut (A-5)
making sure that it is perfectly
secure: turn the filter-holder
handle from left to right.
· Put one/two coffee cup/s under
the filter-holder nozzle (A-15/16).
· Check that the red light of the
water temperature indicator (B-
26) is out or wait until it goes out.
· Push the coffee button (B-21) and
the coffee measure dispensed will
be exactly the same as the one
selected and programmed.
· Take the filter-holder out of the
ring nut and remove the ground
coffee.
USE OF COFFEE PODS
(E.S.E SYSTEM)
· E.S.E. system means Easy Serving
Espresso and corresponds to the
international standard for brewing
coffee using coffee pods (one
throwaway portion of roasted
coffee) and a suitable coffee
machine. The E.S.E. system is
easy, practical and ecological
because it doesn’t need particular
servicing and it is environmentally
friendly. Moreover it is also a
hygienic way to drink coffee
thanks to its special packaging
that avoids coffee coming out and
it can be easily removed after use.
· The machine can work also with
pods: one throwaway portion of
roasted coffee (for one single
coffee only).
· Turn the knob (B-19) to the
required coffee measure (long or
short single coffee) and the
corresponding light will illuminate.
· Insert the one throwaway pod
into the filter-holder (use the 1-
cup-filter)
· Insert the filter-holder (A-11)
correctly into the ring nut (A-5)
making sure that it is perfectly
secure: turn the filter-holder
handle from left to right.
· Put the cup under the 1-way
nozzle (A-15).
· Check that the red light of the
water temperature indicator (B-
26) is out or wait until it goes out.
· Push the coffee button (B-21) and
the coffee will be dispensed.
· Take the filter-holder out of the
ring nut and remove the pod.