Electrolux PE 8036-M - Manual (Page 30)

30
INDEX
1. Description of the coffee
drawer
2. Installation
3. Adjustment of the front panel
1. DESCRIPTION OF THE
COFFEE DRAWER
(PICTURE A)
This drawer is optional in the
coffee machine. It can be helpful
for the user in making coffees or
cappuccinos. It can contain all
coffee machine’s accessories and
has also a basin for coffee
grounds as well as an useful tray.
1. Drawer structure
2. Shaped
plate
3. Tray
4. Basin for coffee grounds
5. Left runner
6. Right runner
7. 3 self-threading screws
4,8x15
8. 8 self-threading screws
4,8x15
9. 1-cup-filter holder’s seat
10. Measure’ s seat
11. 2-cup-filter holder’s seat
3. INSTALLATION
· Attention: Where instructions
are marked with an
*,
please
refer to chapter 12 titled
“Installation without
support”.
· Position the side plate (
*
) and fix
it with the double-sticker strips.
(B1)
· Fix the coffee drawer’s runners
(5-6) with the screws. (B2)
· Fix the brackets (
*
) with the
screws. (B3)
· Fix the cross-bar (
*
) using the
correct accessories. (B4)
· Install the runners (
*
) of the
appliance. (B5)
· Insert the drawer. (B6)
· Insert the coffee machine. (B7)
· If necessary take the coffee
machine and the drawer out of
the cabinet and adjust the cross-
bar (
*
). (B8)
· Insert again in the cabinet the
coffee machine and the drawer.
(B9)
4. ADJUSTMENT OF THE
FRONT PANEL
If necessary the front panel of the
drawer can be adjusted in order to be
perfectly aligned to the cabinet and to
the other electric household
appliances.
VERTICAL ADJUSTMENT
To adjust vertically the front panel of
the drawer release the screw (X-C1),
make the necessary adjustments and
screw down the screw again. (C1)