Lamp management, Lc-xt1 – Eiki LC-XT1 User Manual
Page 44
LC-XT1
.
This Projector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by Lamp Management
Function. Lamp Management Function detects the status of all lamps and shows the status on screen or on the LAMP REPLACE
indicator. This function also automatically controls the Lamp Mode when any of lamps is out for the end of life or malfunctions.
Lamp Replace Indicator
This LAMP REPLACE indicator lights yellow when any of Projection Lamps is nearing its end, and flashes when any of them
becomes out. Check the number of the lamp on Lamp Status Display and replace the lamp.
Lamp Status Display
Lamp Status Display appears on the screen when power switch is on or Menu Bar is displayed. This shows the status of
each
lamp as; ON, OFF, NEAR END, or OUT. Refer
to the following for each status.
Lamp Mode Changeover
Lamp Management Function automatically changes the combination of lighting lamp (Lamp Mode) by detecting the status of lamp.
When any of 4 lamps becomes out, the Lamp Mode is changed over from 4 lamps to 2 lamps. And when any of 2 lamps are out,
the projector operates with 1 lamp. Lamp Mode can be switched to 4 lamps or 2 lamps manually. Refer to SETTING section on
page 39, 40.