Epson ACULASER M8000 series - Manual (Page 227)

Using the PCL6 Printer Driver (Only for Epson PCL6 Printer Driver)
To print in the PCL mode, you will have to install the printer driver. Consult the customer support
in your region regarding how to get the printer driver.
Note:
The PCL6 printer driver and EPSON Status Monitor cannot be used at the same time.
Installing the PCL6 printer driver
Note:
❏ Installing the printer software for Windows Vista, XP, 2000, Server 2008, or Server 2003 may require
administrator privileges. If you have problems, ask your administrator for more information.
❏ Turn off all virus protection programs before installing the printer software.
❏ The examples in this section are from the Windows XP operating system. They may vary in
appearance from what actually appears on your screen; however, the instructions are the same.
❏ When uninstalling the printer driver, select EPSON Monochrome Laser P6 in the uninstallation
program. If you select EPSON Printer Software, the uninstallation may not be completed
successfully.
1. Make sure that the printer is turned off.
2. Double-click SETUP.EXE. The End User License Agreement dialog box appears.
3. Read the license agreement. If you agree with the terms, select the I accept the terms of the
above License Agreement check box. Then click Next.
4. Select the name of your printer, then click Next.
EPSON AcuLaser M8000 Series User's Guide
About the PCL Printer Driver 227