Fx menu – Epson ACULASER M8000 series User Manual
Page 86
Specifies whether the printer prints a slashed or unslashed zero.
FX Menu
Item
Settings (default in bold)
Font
Courier, Prestige, Roman, Sans serif, Script, Orator S, OCR A, OCR B
Pitch
10, 12, 15 cpi, Prop.
Condensed
Off, On
T. Margin
0.40 ... 0.50 ... 1.50 inches in 0.05-inch increments
Text
1... 66 ... 117 lines
CGTable
PcUSA, Italic, PcMultilin, PcPortugue, PcCanFrenc, PcNordic, PcTurkish2, PcIcelandic,
PcE.Europe, BpBRASCII, BpAbicomp, Roman-8, PcEur858, ISO Latin1, 8859-15ISO
Country
USA, France, Germany, UK, Denmark, Sweden, Italy, Spain1, Japan, Norway, Denmark2, Spain2,
LatinAmeric
Auto CR
On, Off
Auto LF
Off, On
Bit Image
Dark, Light, BarCode
ZeroChar
0, (or the zero character with a slash)
Font
Selects the font.
Pitch
Selects the pitch (the horizontal spacing) of the font in fixed pitch, measured in cpi (characters per
inch). You can also choose proportional spacing.
Condensed
Turns condensed printing on or off.
T. Margin
EPSON AcuLaser M8000 Series User's Guide
Using the Control Panel 86