Ericsson HM121dp - Manual (Page 26)

Customizing Communication Settings
26 (47) EN/LZT 108 6429 R1
May 2003
5 Customizing Communication Settings
Once the ADSL Modem HM121dp/di and software have been installed, the
communication settings may be easily updated by performing the following steps.
Note:
The communication settings should only be changed if
you have received new information from your ADSl
service provider
1 From your PC desktop click Start -> Programs -> HM121dp/di DSL Modem
-> Configure.
2 The "Communication Settings" window appears:
Figure 20: Communication Settings
Note:
The settings displayed in the "Communication
Settings" window differs depending on which driver
type that is used in the installation (in the above
example, the LAN driver is used). The possibilities to
change specific settings might also have been
disabled by your ADSL service provider.