Eureka WHIRLWIND 6980 - Manual (Page 12)

12
Motor will not start.
Ⅺ
Electric Plug
Ⅺ
Push plug securely into outlet.
Ⅺ
Try another outlet.
Ⅺ
Check circuit breaker.
Motor suddenly stops.
Ⅺ
Thermal Cut Off
Ⅺ
Refer to page 4.
Does not clean the carpet
Ⅺ
Filters
Ⅺ
Clean or replace the filter(s). Hint: If picking up
or floor. fine dust, the filter may not look dirty but a fine
substance tends to reduce suction when it blocks
the airflow through the filter(s).
Ⅺ
Dust Compartment
Ⅺ
Be sure hose connection is inserted properly into
dust compartment.
Ⅺ
Be sure the dust compartment is properly seated
into the cleaner body. See page 9.
Ⅺ
Empty dust compartment.
Ⅺ
Belt
Ⅺ
Replace a cut, loose or out of shape belt.
Ⅺ
Brush Roll
Ⅺ
Clean hair and thread from bristles and end cap
area. Replace brush roll if bristles are worn.
Ⅺ
Hose
Ⅺ
Remove any clogs from the hose that restrict the
airflow.
No suction at the end of
Ⅺ
Filter(s)
Ⅺ
Clean or replace the filter(s). Hint: If picking up
the hose. fine dust, the filter may not look dirty, but a fine
substance tends to reduce suction when it blocks
the airflow through the filter(s).
Ⅺ
Hose
Ⅺ
Remove any clogs from the hose that restrict the
airflow.
Headlight not working.
Ⅺ
Light Bulb
Ⅺ
Replace light bulb.
Noise from the brush roll
Ⅺ
Brush Roll
Ⅺ
Remove powerhead hood and clean debris or
area. items from the brush roll area.
Ⅺ
Belt
Ⅺ
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Ⅺ
Belt
Ⅺ
Replace a cut, loose or out of shape belt.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM CAUSE SOLUTION
3
3
3
3
3
3
3
3
3
3
3
3
3