Epson Apex 20020 - Manual (Page 19)

Chapter 1
Setting Up Your System
Setting up your Apex personal computer is easy. Just follow
the nine steps in this chapter. You may
want
to leave the back
cover foldout of this book open so you can refer to the two
illustrations identifying the different parts of the computer.
N o t e N o t e
If you have experience setting up computers, you may prefer If you have experience setting up computers, you may prefer
to follow the brief instructions on the Read This First card
to follow the brief instructions on the Read This First card
included with this manual. (Turn to this chapter if you have included with this manual. (Turn to this chapter if you have
any questions, and for instructions on copying your system any questions, and for instructions on copying your system
diskettes.)
diskettes.)
When you finish setting up your computer, go on to Chapter 2
and follow the instructions there to run the Setup program.
The Setup program updates the list of equipment installed in
the computer. You need to run this program the first time you
use
your computer and any time options are added or changed.
1
Unpacking
As you unpack the different parts of your computer system, be
sure to inspect each piece. If anything is missing or looks
damaged, contact the place where it was purchased for missing
items or replacements. If you cannot obtain the necessary part
or parts, call your Epson Customer Care Center for assistance.
Please have the computer’s serial number ready when you call.
Setting Up Your System 1-1