Epson Apex 20020 - Manual (Page 44)

2. To change the Main memory setting press Enter. The
value changes to 256KB. Press Enter again to change
it to
512KB. If you press Enter again, the value returns to
640KB.
3. To change the Expansion memory setting, highlight the
Expansion
option. You can increase and decrease the
memory in 64KB increments by using the + and -keys. For
example, to increase the expansion memory from 0KB to
256KB, press + four times. The screen displays the
following:
640 KB Main
256 KB Expansion
** SAVE SETTINGS **
4. When you finish setting the amount of memory, highlight
** SAVE SETTINGS
** and press Enter to return
to the main menu.
Setting the Type of Display
Select the
Display option
in the main menu if you are not
using a color graphics monitor or if you change the video card
in your computer.
If you are using the MGA card that came with your
computer, make sure that both monitor switches (labelled
"color/mono") are set correctly if you are using a
monochrome or color graphics monitor. One monitor switch
is on the MGA card on the back of the compuer and the
other is on the front. See Chapter 1 for instructions.
Note