Wolf 36 Inch Cooktop Installation Guide - Manual (Page 11)

wolfappliance.com | 11
Contemporary Cooktop
STANDARD INSTALLATION
An optional template has been provided to aid in place-
ment of the valve holes.
IMPORTANT NOTE: Prior to installing the cooktop, install
the valve stem spacers on the valve stem retainers to
achieve the appropriate depth. A 1"
(25) thick facade does
not require a spacer. For all facades less than 1" (25) , sub-
tract the thickness of the facade from 1" (25) to determine
the required spacer thickness.
1 Once the proper spacing is determined, remove the
paper backing from the spacers and apply to each valve
stem. Refer to the illustration below.
2 Insert the front of the cooktop into the opening. Slightly
angle the cooktop to align each valve stem with the
holes in the façade. Then lower the back of the cook-
top into position. Refer to the illustration below.
3 Install the bezels to the valve assemblies by rotating
clockwise until hand tight. Do not overtighten. Refer to
the illustration.
SPACER
RETAINER ALIGN
VALVE STEMS
Apply spacers prior to
installation
Insert Contemporary cooktop
BEZEL
Install bezels
Installation