Convection bake 2, Tips, Convection multi-rack – Bosch 800 Series 30 Inch Double Speed Combination Smart Electric Wall Oven Owners Manual User Manual

Page 24: Pizza 2, Roast, Convection bake, Pizza

Advertising
background image

24

Convection Bake

2

Convection Bake is similar to Bake. Heat comes from the

upper and lower heating elements. The main difference

in convection baking is that the heat is circulated

throughout the appliance by the convection fan.

The Convection Bake mode is well suited for cakes, bar

cookies and breads to take advantage of the bottom

heat, yielding a better crust on baked items.

The benefits of Convection Bake include:

Slight decrease in cook time.

Higher volume (yeast items rise higher).

Tips

Reduce recipe temperature by 25°F. Refer to the

cooking chart at end of this manual.

Place food in shallow, uncovered pans, such as

cookie sheets without sides.

If baking more than one pan on a rack, allow at least

1-1

^

“ of air space around the pan.

For cakes use rack positions 2

 

and 5. Stagger pans

so that one is not directly above the other (see

following graphic).

Convection Multi-Rack

:

Convection Multi-Rack cooks with heat from a third

element behind the back wall of the oven. The heat is

circulated throughout the oven by the convection fan.
The Convection Multi-Rack is well suited for cooking

individual serving-sized foods such as cookies and

biscuits. It is also good for cooking on multiple racks

(2

 

or 3) at the same time. Baking cookies is possible on

6

 

racks simultaneously. In this case, the baking time

increases slightly.

The benefits of Convection Multi-Rack include:

Even browning.

Time savings as a result of using multiple racks at one

time.

Tips

Reduce recipe temperature by 25°F if Auto

Convection Conversion is not activated.

Place food in low-sided, uncovered pans such as

cookie sheets without sides.

If baking more than one pan on a rack, allow at least

1“ to 1

^

“ of air space around the pan. Stagger pans

so that one is not directly above the other.

Pizza

2

In the

Pizza

mode, heat from the upper and lower

elements is circulated throughout the oven by the

convection fan.

Use the Pizza mode for fresh or frozen pizza.

Tips

There might be a slight decrease in baking time.

Check before minimum package time.

When baking a frozen pizza:
For a crispy crust, place directly on the rack.
For a softer crust, use a pizza pan.

When proofing pizza dough, coat dough with olive oil

and cover it in a bowl tightly with plastic wrap to

prevent crust formation.

Sprinkle cornmeal on the pizza pan to prevent sticking.

If using a pizza paddle, sprinkle the paddle liberally

with cornmeal for ease in transferring the dough to the

pan.

If par baking handmade pizza dough, prick the dough

with a fork before baking.

If using a pizza pan, choose a dark, perforated pan for

a more crisp crust and a non-perforated pan for a

softer crust.

Preheat baking stones following manufacturer’s

recommendations while the oven is preheating.

Bake homemade pizzas on rack position 2

 

in the

center of the rack.

Follow manufacturer’s directions for frozen pizza.

The convection fan cycles on and off when using pizza

mode.

Roast

%

Roast uses both the upper and lower elements to

maintain the oven temperature. Roasting uses more

intense heat from the upper element than the lower

element. This results in more browning of the exterior

while the inside remains especially moist.

Roast is best suited for large cuts of meat and poultry.

Tips

Preheating the oven is not necessary.

Use a high-sided broil pan or roasting pan. Cover dish

with a lid or foil for less tender cuts of meat.

Advertising
This manual is related to the following products: