Echo HCA-2400 - Manual (Page 14)

14
S
PECIFICATIONS
MODEL SHC-1700 1/1E SHC-2100 1/1E SHC-2400 1/1E HCA-2400 1E
Length 1395 mm (54.9 in.) 1816 mm (71.5 in.) 2190 mm (86.3 in.) 2034 mm (80.1 in.)
Width 216 mm (8.5 in.) 216 mm (8.5 in.) 216 mm (8.5 in.) 216 mm (8.5 in.)
Height 235 mm (9.3 in.) 235 mm (9.3 in.) 229 mm (9.0 in.) 229 mm (9.0 in.)
Weight (dry) * 5.6 kg (12.4 lb.) 5.6 kg (12.3 lb.) 5.7 kg (12.6 lb.) 6.2 kg (12.6 lb.)
Engine Type Air cooled, two-stroke, single cylinder gasoline engine
Bore 32.2 mm (1.27 in.) 32.2 mm (1.27 in.) 34.0 mm (1.34 in.) 34.0 mm (1.34 in.)
Stroke 26.0 mm (1.04 in.)
Displacement 21.2 cc (1.29 cu. in.) 21.2 cc (1.29 cu. in.) 23.6 cc (1.44 cu. in.) 23.6 cc (1.44 cu. in.)
Exhaust Spark Arrestor Muffler
Carburetor Diaphragm w/primer
Ignition System Flywheel Magneto, CDI (capacitor discharge ignition) with ESG
Spark Plug NGK BPM-7A (Gap 0.65 mm (0.026 in.) NGK BPM-7Y (Gap 0.65 mm (0.026 in.)
Fuel Mixed (Gasoline and Two-stroke Oil)
Fuel/Oil Ratio 50:1 ECHO High Performance, two-stroke air cooled engine oil
Gasoline
89 Octane unleaded. DO NOT use fuel containing methyl alcohol,
more than 10% ethyl alcohol or 15% MTBE.
Oil 50:1 ECHO High Performance, two-stroke air cooled engine oil
Fuel Tank Capacity 0.5 lit. (17.0 US fl. oz.)
Recoil Starter System Automatic Recoil Starter
Clutch Centrifugal Type
Gear Case Ratio 6.36:1 Reduction 3.5:1 Reduction
Gear Case Lubrication All purpose lithium based grease every 50 hours of use
Cutter Double Reciprocating Blade - Double Edge
Length 420 mm (16.5 in.) 524 mm (20.5 in.) 524 mm (20.5 in.) 450 mm (17.7 in.)
Pitch 35 mm (1.4 in.)
Idle Speed 2800 - 3200 RPM
Wide Open Throttle
Speed
8000 - 10000 RPM