Some – Electrolux ER 6642 T User Manual

Page 10

Advertising
background image

10

Problem

No power to the

appliance

The temperature in the

appliance is too high

The temperature in the

appliance is too low
Excessive frost and ice

has built up

The appliance is noisy.

Possible Cause

No power at the socket.
There is a power cut.

The fuse has blown.
Thermostat control is set at „0“.
The appliance is located in an unsuitable position.

The thermostat control is set too low.

The thermostat control is set too high.

The door has been left open.
Something is obstructing the door.
The door gasket is dirty.
The appliance is not level.

Solution

Check there is power at the socket.
Check there is not a power cut by checking the

household lights.
Check the fuse has not blown.
Check the thermostat.
Check the ambient temperature is within the

appliances operating limits of 16 °C to 32 °C.
Check that the thermostat control knob is turned to

the correct setting relative to ambient conditions.
Set the thermostat control knob to a lower

position.
Check the door has not been left open.
Check nothing is preventing the door from closing.
Check the door gasket is intact and clean.
Check if the appliance stands stable (all four feet

should be on the floor).

Some

Some

thing N

thing N

o

o

t W

t W

or

or

king

king

If the appliance is not working correctly, please carry out the following checks before contacting your local

Electrolux Service Force Centre.

If after the above checks your appliance still does not

operate correctly, contact your local Electrolux

Service Force Centre.
Please note that it will be necessary to provide proof

of purchase for any in-guarantee service calls.

In-guarantee customers should ensure that the

above checks have been made, as the

engineer will make a charge if the fault is not a

mechanical or electrical breakdown.

Ser

Ser

vice and Spar

vice and Spar

e P

e P

ar

ar

ts

ts

In the event of your appliance requiring service, or if

you wish to purchase spare parts please contact your

local Electrolux Service Force Centre by telephoning:

0870 5 929929

Your call will be routed the Service Force Centre

covering your post code area.
For the address of your local Service Force Centre

and further information about Service Force, please

visit the website at www.serviceforce.co.uk
For service in the Republic of Ireland contact

Electrolux

Long Mile Road

Dublin 12
Telephone: 01 4090752.

Before calling out an engineer, please ensure you

have read the details under the heading

„Something Not Working?“.
When you contact the Service Centre you will need

to give the following details:
1. Your name, address and post code

2. Your telephone number

3. Clear and concise details of the fault

4. The model and serial number of the appliance

(found on the rating plate)

5. The purchase date

Advertising